Team:Alberta-North-RBI E/Business Plan

From 2012e.igem.org

Revision as of 04:28, 26 October 2012 by Ctheodore (Talk | contribs)

Contents

Mission Statement

Piles and piles of reusable recycled paper wastes are settled in landfills today. Applying the science and engineering together can convert this paper waste into high value products such as chemicals. Upcycled Aromatics is a creative, innovative company who aims to reduce landfill wastes, minimize environmental impacts, and increase the resources for these treasured chemicals by using the concept of synthetic biology to transform the recycled paper into our products. We are aiming to diverse our feedstock to not only recycled wastes but also other cellulosic wastes.


Executive Summary

New developments in synthetic biology have allowed scientists to explore innovative ways of producing important, high-value chemicals from what was once seen as industrial waste. Paper mills and recycling plants, as a byproduct of their operation, produce a waste sludge composed of paper fibres too short for further processing. As this waste is seen as having negative value (requiring money to be disposed of), this is an attractive source of potentially exploitable cellulose. On the other end, aromatics represent a potentially lucrative chemical endpoint, having high price per unit mass and a wide variety of applications as feedstocks in a number of industries. Where others see waste, we at Upcycled Aromatics see opportunity. Our mission is to create an innovative, green, and inexpensive source of vital, high-demand aromatic chemicals by using the principles of synthetic biology.


Our proposed process has two parts: in the first, cellulose from waste sludge from recycling plants is converted into glucose; in the second, glucose from the first part is used as a feedstock for the biosynthesis of aromatic chemicals from genetically engineered bacteria.


In the glucose-aromatic conversion, we plan to use a single metabolic pathway in the biosynthesis of our product, with “on and off switches” at each “step”. This gives us the freedom to produce any intermediary compounds in addition to the natural end product. The current proposed pathway will allow us to produce either shikimate or cinnamic acid derivatives using the method described above, and should the market favour it, give us the flexibility to produce any other substance along the pathway.


Both shikimic acid and cinnamic acid (and its derivatives) are high-value, high-demand chemicals with steady markets and high potential for growth. Current commercial production of shikimic acid by extraction from Chinese star anise is effectively monopolized, and as seen from recent shortages in 2005, highly susceptible to the effects of a bad harvest. Meanwhile, cinnamic acid, an important precursor in the production of sweeteners and many pharmaceuticals, is produced mainly from synthesis of potentially harmful and polluting organic solvents. Upcycled Aromatics, with its innovative syn-bio approach, can provide a reliable and green source of both these vital compounds, produced from a feedstock for which there is minimal competition.


Once our project has been given the go-ahead for commercial scale-up, we plan to install our first plant directly downstream of either a paper mill or recycling facility. This will minimize transportation costs of the sludge, allowing us to spend money saved on enzymes needed for the cellulose-glucose conversion. Eventually, we hope to move towards a model with centralized production and an extensive distribution network to move goods to and from our suppliers and our plants.


The management of the company will consist of the current members of the University of Alberta iGEM Entrepreneurial team. With our extensive backgrounds in biochemistry, chemical engineering and genetics, we as a team have the knowledge and the skillset to make Upcycled Aromatics a success. Furthermore, we have also assembled a board of advisors that will provide us with the scientific and business expertise as we move forward. They include Dr. Chris Dambrowitz, who has had managerial experience with MDS Sciex (now AB Sciex), Blue Heron Biotechnology (Bothell WA), Visible Genetics (Toronto ON) and Atomic Energy of Canada Ltd (Chalk River ON), Dr. Dominic Sauvageau, who is doing research in bioprocessing strategies in microbes and has been involved with the start-up company Laborium Biopharma, Dr. Anthony Briggs of the University of Alberta Faculty of Business, who holds a M. S. from MIT Sloan and is an expert in the intellectual property of biotechnology, and Glen Penny, who is involved with a venture capital firm currently operating in the USA.

The Opportunity

Specialty Chemicals

Specialty chemicals are formulations of chemicals containing one or more complex, pure chemicals as active ingredients. They are used in the manufacturing of a wide variety of products including, but not limited to, adhesives, cosmetic additives, elastomers, flavours, fragrances, polymers, surfactants, and textile auxiliaries. They are produced in limited quantities using a variety of key technologies such as chemical synthesis, biotechnology, extraction, and hydrolysis of proteins. Specialty chemicals are formulated to custom specifications, often varying from one customer to another even within the same industry. Formulations also vary with application, function, and operating conditions. They are sold for high prices according to exacting specifications used for further processing within the chemical industry. The profitability of the speciality chemical industry make it an extremely attractive business opportunity. They are low volume, high priced chemicals targeted at highly differentiated processes making entering the marketplace easier for new companies.


According to the 2012 Global Specialty Chemicals MarketLine Industry Profile the global market for specialty chemicals had total revenue of $767.5 billion in 2011, representing a compound annual growth rate (CAGR) of 2.7% between 2007 and 2011 [1]. The market is further projected to reach $980 billion by the end of 2016 [1]. The specialty chemical industry focuses on the development of chemicals based on function and market value. The importance is not on the empirical structure of these chemicals, rather on how they may be used by end-user markets. Additionally, the growth of the specialty chemical industry is tied to exploring functions and applications for both new and existing chemicals. These chemicals may serve traditional and niche markets, as well as expand to new geographic markets.


Fine chemicals is the largest segment of the specialty chemical market, representing 28.9% of the market's total value [1]. Fine chemicals are used as starting materials for pharmaceuticals, biopharmaceuticals, agrochemicals, as well flavors, fragrances, food and food additives. Paints, coatings and surface treatments also account for a significant portion of the market segment.


The current specialty chemical global market can be analyzed using a five force analysis including: degree of rivalry, new entrants, substitutes, supplier power, and buyer power. There are a respectable number of chemical manufacturers in the market, however, players may operate in a diverse range of markets making rivalry a moderate force. The threat to new entrants is dependent on the market they intend to target. Many specialty chemicals are produced in large quantities making small-scale market entry unlikely. On the other hand, certain specialty chemicals are not strongly differentiated and buyers may be attracted away from current players if a better price is offered. Substitution is a weak force as buyers of specialty chemicals often require specific formulations. Supplier power is increased by the added value of specialty chemicals in addition to the few alternatives that buyers have. Lastly, buyer power is weakened by the fact that there are no direct substitutes and buyers have no choice but to purchase the chemical as a key ingredient to their manufacturing process.

Biomass Utilization

On the upstream side, biomass represents one of the only foreseeable abundant resources that can be used for low cost production of organic fuels, chemicals and other materials. Furthermore, recovering biomass has benefits at every stage in the life cycle of a consumer product - including sustainable resource supply, energy security, and waste disposal. So, what kind of biomass feedstock are we interested in?


Several hundred million metric tons of municipal solid waste (MSW) is disposed of in Canada and the United States annually. Paper products alone account for approximately 30% of MSW by weight before recycling. Recycled paper processing plants use paper as their feedstock and recover fibre that can be used to produce new paper products. Paper is essentially composed of a fibre mat. Virgin fibres are straight, smooth and largely undamaged. However, to make a quality piece of paper, the fibres must be flattened to increase contact area and bond potential between them. Additionally, in the paper recycling process, fibres are subjected to a number of chemical and mechanical processes which decrease the length of the fibres. As a result, paper fibre cannot be recycled endlessly. It is generally accepted that a fibre can be used six to seven times before it becomes too short to be utilized in new paper products.


Actually, this unusable fibre accounts for 15-20% of the recycled fibres fed to the recycling plant and are considered waste. Paper recycling companies pay to have this waste buried in a landfill or sent out in a waste waster stream. Where others see waste, Upcycled Aromatics sees opportunity.


The major constituent of these paper fibres is cellulose, a homopolysaccharide made up of β-D-glucose. Ergo, the unusable, short fibre in the waste stream of paper recycling plants is a significant source of potentially exploitable cellulose. This feedstock is more attractive than other lignocellulosic biomass because it is processed prior to its utilization and requires no pre-treatment as a result. Additionally, the integration of this process into an already existing infrastructure eliminates transportation costs. For the recycling plant, value is added to their waste stream and there is a more sustainable solution for an already green industry.


Our Solution

As bio-processing technologies continue to improve, the use of biomass as a renewable resource will become more and more attractive. Biomass exists in many forms and is produced by diverse industrial processes. Paper recycling plants, in particular, generate a copious amount of waste biomass in the form of paper sludge. Costly disposal of this waste stream typically occurs via landfill, or through inefficient combustion. This is somewhat shocking because paper sludge is actually a significant source of valuable cellulose. Through our integrated bio-processing strategy, we can exploit this cellulose to produce high-value chemicals while simultaneously having a positive impact on waste management.


At Upcycled Aromatics, work is underway on the design of an integrated bioprocessing facility. In conjunction with an enzymatic hydrolysis, engineered bacteria will transform the paper sludge waste stream into aromatic platform chemicals. The engineered bacteria will have the ability to produce a variety of aromatic chemicals - controlled by process conditions such that modification of one parameter results in the production of one specific chemical. The biosynthetic pathway under investigation will allow us to produce shikimic acid, cinnamic acid and it's derivatives.

The details of our solution can be found in two sections:


Process


Genetics



The Competition

Information pertaining to chemicals produced from our plants is located below.

Shikimic Acid

Shikimic acid is a vital precursor to and major bottleneck in the production of the anti-influenza drug Tamiflu. Taking into account the recent H1N1 and H5N1 influenza outbreaks and reports of shikimic acid shortages in 2005, demand for the chemical seems likely to increase should another pandemic scare occur. Currently, pharmaceuticals giant Roche produces the majority of the world's supply of shikimic acid, holding an effective monopoly on the market. The Roche group's method of extraction involves isolating the compound from Chinese star anise, at a yield of approximately 30g of seed to every 1g of shikimate. In addition to being ineffient, the harvest itself is labor intensive and highly polluting. Furthermore, as demonstrated by the Tamiflu shortages announced by Roche in 2005, a bad harvest will lead inevitably lead to mass shortages in the drug supply. With Roche's per annum production capacity reaching 300 million treatments of Tamiflu in 2007 (ten times the amount in mid-2003), and taking into account the possibility of another flu pandemic scare, the shikimic acid market has the potential for explosive growth.


With this in mind, academics have disputed the infeasibility of producing the chemical by other means. Alternative routes to Tamiflu or sources shikimic acid may prove to be possible sources of competition for Upcycled Aromatics' major market. They include the usage of aminoshikimic acid, biosynthesized by genetically modified baceria, over shikimic acid as a chemical starting point, as well as extraction of shikimic acid from pine needles. However, commercial viability on scale-up has yet to be proven for most proposed processes.


Current industrial production already involves fermentation of genetically modified E. coli, but Upcycled Aromatics can offer a green and reliable souce of shikimic acid.

Intellectual Property Concerns

Intellectual property rights to the current proposed biosynthetic process to be used in our organism are held by the researchers from the Frost group at Michigan State University. Roche currently holds a non-exclusive license for this technology and reports that in 2006, the majority of shikimic acid production was produced by fermentation from E. coli. Upcycled Aromatics is currently negotiating for a license from Michigan State University valued at approximately at a flat value of $25,000 and 2% of overall profit.

Cinnamic Acid

Cinnamic acid, converted to its ester form, is an organic chemical with a wide variety of applications ranging from sweeteners to pharmaceuticals. Although its value may be lower on a per gram basis when compared to shikimic acid, a wider variety of applications may mean increased profits depending on current demand. The scale of annual global production is in the thousands on tons as of the year 2000, and is likely to grow as demand for artificial sweeteners increases.


Major producers include Bayer (Germany), DSM (Netherlands), and Kay Fries (USA).


Typically, the chemical is produced by a condensation of benzaldehyde and acetic anhydride in the presence of a sodium acetate catalyst, and can yield over 80% cinnamic acid based on consumed benzaldehyde. Although the aforementioned method is one of the oldest, most well-known, our process avoids the use of potentially polluting organic solvents in favour of converting something with negative value (paper sludge) into a desirable high-value platform chemical with potentially comparable production capacity.

Feedstock

Our proposed feedstock, paper and recycling mill sludge, has little to no market competition due to its widespread perception as a waste with negative value incurred as a result of its disposal cost. The conversion of sludge to glucose shows promise (Banerjee 2011). Other possible uses include feedstock for the production of ethanol and lactic acid, but other possible applications remain relatively undeveloped. As such, we expect to be able to acquire large amounts of our feedstock easily and cheaply.

Our Advantage

Upcycled Aromatics’ competitive advantage lie in our flexible process, our tight integration between process and genetics, and our choice of feedstock. We plan to provide the aromatic chemicals with the volume and purity customers expect at a fraction of the financial and environmental costs.

Our Flexibility

The flexibility our process offers us the option to respond to shifting markets. Although the value of shikimic acid is many times higher than that of cinnamic acid and its derivatives, any lull in demand can be compensated for by simply flipping our genetic switch and changing our product. On the other hand, any future spikes in the price of shikimic acid (perhaps due to another pandemic scare) will allow us to take advantage of such opportunities. Furthermore, the switchability of Upcycled Aromatics will insulate us from price crashes in any one of our possible products. Furthermore, the semi-permanent, modular nature of the process allows us to avoid costs in the transportation of glucose, and allows us to be consistent in the design and quality of our "tack-on" plants.

The Integration Between Process and Genetics

Process and genetics in Upcycled Aromatics have been developed in tandem. Such a relationship results in a great deal of synchronization between these two very different areas, ensuring that we will never experience any disconnect between biology and engineering. As these feed back onto one another in an iterative process, improvements in one will always be a fruit of and perhaps a seed for improvements in the other.

The Feedstock

As mentioned previously, it is impossible for a recycling plant to process the same paper more than six to seven times before the fibres are deemed too short and disposed of. Our revolutionary strategy is to utilize these once useless fibres as the feedstock for our process, ultimately turning what was once waste into valuable industrial chemicals important in both the pharmaceutical and cosmetics industries.


Our strategy ultimately allows us to save significantly on operating costs, and since our initial prototype facility will be located at a recycling plant onsite, costs associated with the feedstock will be negligible if not zero. Many people are currently using cellulose as a feedstock, for example, as a precursor to bioethanol, but with Upcycled Aromatics' novel process, we are able to virtually eliminate any and all associated transportation costs, which constitute a huge energy sink in most other cellulosic approaches. Our revolutionary idea, while increasing our margins, also gives us the opportunity to funnel the money saved into other endeavours, such as expansion or R&D. And because our operating costs are so low, if the need arises, we have a great deal of room to undercut our prices to remain competitive with other suppliers.

Intellectual Property Concerns

To ensure that our process remains open and transparent to the public, we have decided against pursuing a intellectual property rights for the genetics involved in creating our strain. We instead plan to patent for the process itself to ensure that we retain control over the intellectual property of our company.

Marketing Strategies

Marketing Analysis and Exploration

  • Target on a marketing consultant to get early stage market research information.

Potential consultant companies: Matrix Fine Chemicals, StrategyMark, MarketsandMarkets, etc.

Estimated Cost: $4000


  • Explore the world market by giving competitive prices and services.


Company Construction

  • Package the company: set up professional website, company logo, and branding.

Estimated Cost: $1000


  • Easy reachable sales and technical persons (online, on call, “24 hours a day”) for products and services.


  • Keep persons getting feedback from the recycle plants and customers.


Media and Advertisement

  • Write articles for trade magazines among the recycling industry and fine chemicals industry to get credibility and exposure.

Recycling industry magazines: Solid Waste and Recycling, Recycling Today, Recycling International, etc.

Fine chemicals industry magazines: Speciality Chemicals, Chemical Week, Canadian Chemical News, etc.

Estimated Cost: Free


  • Send out technical or product updates and newsletters through emails to clients

Estimated Cost: Free


  • Social Media: Facebook, Twitter, YouTube, etc.

Estimated Cost: Free


Media and Advertisement

  • Other than collaborate with recycle plants, we also need to form strong networks with our buyers down the manufacturing chain. These buyers including pharmaceutical companies, generic drug companies, food producing companies and fragrances producers, etc. We can attract these buyers by giving discount or promotion packages on long term contracts.


  • Participate in trade associations and conferences such as Canadian Generic Pharmaceutical association, Annual World Drug Manufacturing Summits, Paper Recycling Conference & Trade Show, and Canadian Waste and Recycling Expo. During the conferences, we can provide promotional materials, like paper and pens with our company name, logo, and contact information on them, to make impression on our potential business partners.

Estimated Cost: $16000/year


Community Involvement and Reputation Building

  • Enter biotech or business award competition to build reputations. As now the 2012 International Genetically Engineered Machine (iGEM) Entrepreneurial competition is our initial opportunity to present our company to the public.


  • Sponsor local sports teams. Like buying them team shirts. Thus, we can advertise our business as well as showing strong interaction with the community.

Estimated Cost: $5000/year


  • Charity donation.


  • As our product is eventually paper consuming, we might want to set up events like annual tree planting to show our concern about the environment.

Estimated Cost: $1000/year


Milestones

Our milestones are mapped out using a Gantt chart, which can be found here in spreadsheet form.


Initial goal of the company is successful construction and operation of the first commercial plant, which generates revenue. The primary requirement to this is the strain development of Pseudomonas putida that produces shikimic acid and cinnamic acid in high enough yield in order to generate positive cash flow. As part of the iGEM 2012 project, hypothetical design of the strain including host organism selection, schematic of the metabolic engineering, and biobrick design has already been completed. Next step is development of actual genetically engineered strain, which would take two to three years. This includes development of biobricks for desired genes either constitutively or regulated expressible, and knocking out undesired genes in the metabolic pathway from glucose to cinnamic acid. Proof of conceptual model and efficiency of the prototype strain will constantly be tested in pilot-scale bioreactor.By fourth year of the project, commercialized strain with aimed yield should be ready to be utilized in the first plant. Subsequent research on yield improvement and process optimization will constantly take place while first commercial plant launches and operates. The funding for strain development and construction of the first commercial plant will be acquired form angle investors and other seed funds.


While strain development is taking place, our company will take next steps toward the first plant. Contracts with paper recycling plants for cellulosic feedstock and site of the plant attachment, ideally with high waste release will be signed. Also our new technology for chemical production to potential customers, such as specialty chemical companies will be actively advertised, along with face-to-face contacts with the companies being made. When the commercialized strain is ready, primary sale agreement with buyers should be signed. Also, we will acquire patent in order to protect our unique gene construction for chemical production. Regulatory approvals for safety regulation will be acquired.


By the fifth year, the first commercial plant with bioreactors and purifiers will be built and attached to the first supplier paper recycling plant. Operational test will take place for at least an year, before any expansion. The ultimate goal is expansion of the plant across North America and worldwide.


Financial Forecasts

Details concerning our forecasted financial information can be found here as a spreadsheet.

Potential Hurdles

Process-related

1. Inability to engineer organism to produce projected amounts of target compounds


Our process requires a significant rerouting of carbon flow in our organism. While our process is economically viable at the yields currently obtained in literature, reaching the profitability we have projected will require a significant yield improvement. Fortunately, it has been shown in other biotech ventures that yields can be dramatically increased given enough time and funding. The first example of this problem being overcome is in the history of penicillin in which the secondary metabolite was produced at yields 3 orders of magnitude from its initial discovery through directed research. The company Amyris has been able to commercially produce the compounds artemisinin for malarial treatment and biofene for biofuel and synthetic rubber production. Genencor has achieved high production rates and yields of isoprene which have allowed them to begin planning commercial production facilities in Brazil. Isobutanol, a compound not native to biological metabolism and a potential gasoline replacement, has been produced in commercially viable yields by engineered bacteria and is the basis for the company Gevo. The common factor in these examples is the ability of directed metabolic research to sufficiently reroute carbon flow in an organism to produce a desired end product. It is also worth noting that all of the compounds given in these examples are high volume low value products which require much higher rates and yields than our compounds, which are low volume high value chemicals. This is why our business plan allots for significant time and funding in the development phase and why we are confident in the success of our product.


2. Product recovery inefficiencies


As in many biotech ventures, including ethanol production, often one of the largest costs is product recovery and purification. As we would be supplying to highly regulated markets, our product purity would have to be quite high. This is one of the main reasons that ethanol in the United States is subsidized currently. Management of this risk is done in part by the previous point in which research and development stages would increase the carbon flow to our product. This would increase the yields of our product and lower recovery costs. Also in the scale up phase, our team would be looking into a multitude of recovery techniques in order to find the optimal cost effective method in which to progress with the project. Finally the last point that protects this process is the market value of our products. As our product is a low volume high value commodity, it allows us to invest more in the recovery stage than other biotech ventures such as those previously stated.


3. Feedstock quality


The feedstock we plan to employ in our process is one of the many reasons that we have a competitive edge in the market. However, a potential bottleneck in our process would be fluctuating quality of our feedstock obtained. The main way to circumvent this is to establish our commercial production facility at a recycling plant that has relatively low variability in their waste stream. As we relieve the recycling company of a costly burden and introduce an alternate stream of revenue, this allows us the freedom of choice in planning production at a facility that suits our requirements. Another strategy to deal with feedstock composition is to implement quality control protocols. These protocols will allow us to monitor the makeup of the incoming waste stream to be utilized and permit us to tailor conversion aspects to increase efficiencies and overall productivity and profitability of our enterprise.

Finance-related

As many start-ups, Upcycled Aromatics will require a significant amount of cash investment in its initial phase. In order to diminish this requirement, in addition to the traditional means of financing (angels, VC's, etc.), we will approach our feed suppliers (paper recycling plants) with an innovative plan: Front end payment for the installation of our technology for 3 years at a cost lower than the equivalent cost of their waste removal (estimated at $3000 per day for our first partner). This will allow us to secure capital early on in the development of the company. This will help us face the challenge of securing funding without excessively diluting our ownership of the company.


For the early investment, it is a well known generality that new investors will evaluate a company's worth as much lower than the worth perceived by pre-existing investors. As a consequence, these pre-existing investors feel they are giving away too large a share of the company in exchange for the cash investment. In order to avoid this scenario, we are exploring a variety non-diluting funding options:


-Crowdsourcing (ie. Kickstarter)

-Licensing our technology in exchange for a cash payment

-Venture debt (Loan with fixed term and high interest rate)

-Convertible debt (Venture debt with option to convert to equity)

-Royalty financing (Cash payment in exchange for percentage of future profit)

-Upfront payment by feedstock suppliers

Company Structure

We, Upcycled Aromatics, are composed of unique, brilliant, and well-experienced engineers,scientists,business professionals and our advisers. Each team member are well-trained in their specialized fields. Not only are they well experienced, but also, each of them hold the Upcycled Aromatics vision: *insert here*. Even though each division has its own separate duties, but each of us are achieving the same goal:converting waste paper into speciality chemicals to reduce the amount of waste released into landfills.



Company_Structure.png


Business Division: - Shuwei Song,Valerie Ho, Chang Lu, John Chen

  • Responsible for the business portion of the start-up company
  • Some of the responsibilities include: accounting, marketing, market analysis, finance, and risk managements
  • The skills that our business division have are maintain a healthy relationship with our customers and suppliers, enhance our services, assess our financial needs, and promote our products


Research and Development:' - Jermey Morries, Kelly Holdstock, and Lindsey Suh

  • Responsible for the science and research portion of the company
  • As our process is improving each day, our scientists are responsible for finding the new ways to minimize our waste output, optimizing out products and process.
  • Some of the skills we have are project management, critical thinking, creativity, and problem solving


Engineering: - Crystal Theodore, John Chen, and Chang Lu

  • Responsible for the overall process from recycled waste paper to our products
  • The optimize our process, the engineers are involved in design, implementation, equipment selection, and maintenance
  • The skills that our engineers bring to our company are creativity, critical thinking, project management, integrity, and passion



Advisory Board

Upcycled Aromatics' advisory board plays a crucial role in managing, designing, and advising the company. The board will separated into four sections: Director, Science, Engineering, and Business. All of which they all aim to provide knowledge about trends, competitors, and technology. As our company will be producing chemical that will be sold to pharmaceuticals and food companies, the advisory board will identify any political and legislative regulations. The board will also introduce and build a relationship with valuable clients, investors, and suppliers, which then requires containing customers who can provide insight into product development and marketing issues.


Advisoryboard.png



Director:- Chris Dambrowitz – Bioindustrial Strategic Initiatives, Biorefining Conversions Network (BCN)

  • Responsible for overlooking the company
  • Solve or advise any new ways to run the company


Science Director: -Erin Dul

  • Responsible for advising and making important decisions regarding to the science and research portion of Upcycled Aromatics
  • Conducts reviews on the genetics and biology process in the conversion system
  • Maintains a healthy and safe working conditions for the team


Engineering Director: - Dominic Sauvageau, BEng 2002, MEng 2004, PhD 2010, McGill University – University of Alberta Department of Chemical and Materials Engineering

  • Approving our process, equipments, and designs
  • Ensuring our team is following the regulations
  • Advising the engineers on improving the process and designs


Business Director: - Tony Briggs – University of Alberta School of Business: Assistant Professor, Strategic Management and Organization

  • Responsible for overlooking and reviewing the business plans, marketing strategies, risk management and the market size
  • Maintaining and a identify any possible future markets for our products
  • Advising our company on how to expand nationally


Future Direction

As a part of Upcycled Aromatic's commitment to innovation, we are already looking ahead to possible new business opportunities as our company continues to grow.

Feedstock Diversification

Upcycled Aromatics is currently considering promising new feedstocks in order to improve both the quantity and expediency of production. Possible new feedstocks may include lignocellulosic materials from farms and possible partnerships with the forestry industry in order to secure new feedstock supply lines.

Product Diversification

From the other side, Upcycled Aromatics possesses the potential to grow not only in terms of quantity of product, but also in their variety. To that end, Upcycled Aromatics plans to explore the current metabolic pathway in use for possible high-value chemicals. In addition, we are also considering alternative pathways to other fine chemicals that may prove to be particularly valuable in the future.


Follow Us

Contact Us

Email: ualbertaigem@gmail.com

Search